|
|
|
|
|
|
|
|
|
|
|
|
|
|
AEM’s High Flow In-Tank Fuel Pump is designed for high performance naturally aspirated and forced induction EFI vehicles. It delivers reliable performance and high volumes of fuel flow for roughly half the cost of comparable performance fuel pumps. The AEM High Flow In-Tank Fuel Pump flows 340 lph (84 gph) at 40 PSI and is capable of supporting over 1,000 HP at 43 PSI.* Click on the flow curves and current draw vs. fuel pressure graphs below for more information.
|
Back to AEM Main Page
AEM High Flow 245LPH E85 In-Tank Fuel Pump for 2016+ Polaris RZR Turbo
AEM's 245LPH E85-compatible, direct-fit In-Tank High-Flow Fuel Pump for 2016-up Polaris RZR XP Turbo UTVs (PN 50-1225) plugs into the factory wiring harness and is a direct replacement for the OE RZR XP Turbo fuel pump (fits XP Turbo Models Only, will not fit non-turbo RZRs). It is built to withstand extreme duty, delivering a 44% increase in fuel pressure over the factory fuel pump (115 PSI max pressure AEM vs 80 PSI max pressure stock), and it delivers 100% more flow at the stock 58 PSI base pressure (202lph AEM vs 100lph stock)!
Every AEM 50-1225 RZR XP fuel pump is individually tested to flow 245lph (65 gph) at 40 PSI and 202lph (53gph) at the RZR XP/XP Turbo’s 58 PSI base fuel pressure, which is enough flow to support 640 HP at 58 PSI and 482 HP at 22 PSI of boost on gasoline! Flow vs. Pressure and Horsepower vs. Pressure graphs for gasoline, E85 ethanol and M100 methanol are available on the Specs Tab.
|
The AEM E85 Fuel Pump is designed for in-tank installation on high performance naturally aspirated and forced induction vehicles. It flows 340 lph (84 gph) at 40 PSI (please refer to the chart for fuel pump horsepower versus pressure for various applications and fuel types).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The AEM E85/Gas Fuel Pump is designed for in-tank installation on high performance naturally aspirated and forced induction vehicles. It flows 340 lph (84 gph) at 40 PSI (please refer to the chart for fuel pump horsepower versus pressure for various applications and fuel types).
|
The AEM E85/Gas Fuel Pump is designed for in-tank installation on high performance naturally aspirated and forced induction vehicles. It flows 340 lph (84 gph) at 40 PSI (please refer to the chart for fuel pump horsepower versus pressure for various applications and fuel types).
|
AEM’s High Flow In-Tank Fuel Pump is designed for high performance naturally aspirated and forced induction EFI vehicles. It delivers reliable performance and high volumes of fuel flow for roughly half the cost of comparable performance fuel pumps. The AEM High Flow In-Tank Fuel Pump flows 320 lph (84 gph) at 43 PSI and is capable of supporting over 1,000 HP at 43 PSI.* Click on the flow curves and current draw vs. fuel pressure graphs below for more information.
|
|
|
