Back to Skunk2 Racing Main Page

Skunk2 Racing Pro Series Cam Gear Set 2000-2009 Honda S2000 2.0L/2.2L F20C1/F22C1

---

Skunk2 Racing Pro Series Cam Gears for the 2000-2009 Honda S2000 with F20C1 and F22C1 engines are ultra lightweight cam gears that reduce rotational inertia and allows fine tuning of camshaft timing. Skunk2 Pro Series cam gears feature CNC precision machined, hard anodized teeth to reduce premature wear, and Skunk2 Racing’s signature 6-bolt design; eliminating any chance of the gear slipping. Upgrade your S2000 with Skunk2 Racing Pro Series Cam Gears and gain increased engine response and acceleration. Excellent when used with Skunk2 Racing Camshafts, Skunk2 Racing Forged Valves, Skunk2 Racing Valve Springs, and Skunk2 Racing Titanium Retainers.

Applications:
2000-2009 Honda S2000

WARNING!!
• Improperly installed Cam Gears can cause catastrophic engine damage and failure.
Before the removal and installation of parts, please refer to the factory service manual , or equivalent.

Installation Notes:
• When bolting Cam Gear to camshaft, use red locktight and torque to 30ft lbs.
• When tightening the 6 Allen bolts on the Cam Gear use a star pattern. Torque to 6-7ft lbs. using a 1/4” drive torque wrench.
• The timing belt tensioner should be set with a 1/2” of play.
• The initial degree should be set at 0°; dyno tuning is REQUIRED to make an adjustment to the Cam Gear.
• (Due to individual engine setup, Skunk2 does not provide recommended degree settings other than 0°)