Skunk2 Racing Rear Camber Kit
The design of Skunk2 Rear Camber Kits is based on camber kits that we have been using
in our race cars for many years. Skunk2 Rear Camber Kits are a must if you want to
fine tune your rear suspension. With the ability to adjust positive and negative camber,
you can reduce tire wear and significantly improve your vehicle’s handling. Made from
forged alloy steel and aircraft quality AL7075 aluminum, Skunk2 Rear Camber Kits
feature low deflection polyurethane bushings. The bushings act as a bearing allowing
your camber kit to pivot smoothly without the harsh side effects of using actual spherical
bearings. Unlike the steel and rubber bushings that are found on low quality rear
camber kits, these will not tear or break free. The Skunk2 Rear Camber Kit is the perfect
choice for street and race applications, and works even better when used in conjunction
with Skunk2 Rear Lower Arms, Arm Bars, Strut Bars, and Front Camber Kits.
Skunk2 Suspension Tuning
Skunk2 has been making and selling camber kits since 1995. To accommodate the needs of the market, we made a significant change in 1998 by adding an oversized rectangular shaped top mount for increased positive camber adjustment. In 2000 we pioneered the use of a one-piece forged ball joint. And in 2004 we introduced the patent pending Pro-Series ball joint. Today this same design has become the industry reference standard. The Skunk2 Camber Kits are the number one choice of many pro racing teams and have been on Honda Factory road race cars since 1997. By replacing your factory upper control arms with our camber kits, you gain the ability to correct negative camber that results from lowering your vehicle. Skunk2 front camber kits allow tuners to accurately dial in their suspension settings utilizing quick adjustment sliding ball joints. With over +/- 3 degrees of adjustment our camber kits can minimize the effects of negative camber, help reduce abnormal tire wear, and increase stability at high speeds. Skunk2 camber kits are ideal for race or street applications. Available in Pro-Series Plus, Pro-Series, and Tuner Series.
High-strength Forged Ends
CNC Machined AL7075
Hard Anodized Finish
Polyurethane Bushings
Usually ships within 3-5 business days
PLEASE READ CAREFULLY BEFORE PROCEEDING WITH INSTALLATION
Product Disclaimer
· There is no warranty stated or implied due to the unusual stresses placed on competition products and/or the inability to monitor the
modification, installation and use. The entire risk of quality, performance and defect is with the purchaser and not the manufacturer,
distributor or retailer. Should any product(s) prove to be defective for any reason under any circumstance, the purchaser and not the
manufacturer, distributor or retailer will assume financial responsibility for any consequential damages, repairs/service and any
other liability.
· A vehicle modified by the use of competition product(s) for use on public roadways may not meet local, state or federal regulations.
Installation and use of this competition product(s) may also affect vehicle insurance coverage. It is the purchaser’s responsibility to
meet and comply with regulations and policies before operating the vehicle on public roadways.
· Return of product(s) will ONLY be accepted if product(s) is in resell able condition. All accepted returns will be subject to a 20%
restocking fee. ABSOLUTELY NO RETURNS ON USED PRODUCTS. For more information on our return policy, please call
(951) 808-9888.
· CUTTING OR MODIFYING THE PRODUCT WILL VOID THE WARRANTY!!!
· For technical support, visit the HelpDesk at www.skunk2.com or call (951) 808-9888
· Group A Autosports Inc., recommends the following performance products to maximize power gains:
o Header/high-flow exhaust system
o Cold-air intake system
o Fuel pressure regulator
o Camshafts/adjustable cam gears
Warranty Policy
Group A Autosports Inc. warranties all products to be free of defects in materials and workmanship for normal use and service for a period of 90
Days from the date of retail purchase. Products returned must be inspected and determined to be defective by Group A Autosports Inc. before
any warranty credit and/or replacement is issued. Group A Autosports Inc.’s obligation under warranty shall be limited to repairing or replacing,
at its discretion, any product found to be defective. The consumer will be responsible for transportation charges. Final determination of the
suitability of the product(s) for the intended use is the sole responsibility of the consumer. Group A Autosports Inc. shall not be liable for any
special, direct, indirect, incidental or consequential damages that may be claimed as a result of the failure of any product, including claims for
delay, loss of profits or labor. Group A Autosports Inc. shall not be liable for any damage and/or injury to person(s) and/or property resulting
from improper installation and/or misuse of any product subject to this warranty. There are no other warranties expressed and/or implied
extending beyond those set forth above.
|
