Injector Dynamics fuel injectors are easily configured to work with factory ECMs as well as any standalone system. No two sets Injector Dynamics injectors vary in performance more than 1% for consistent, repeatable results. Each set of injectors is tightly matched for cylinder to cylinder consistency and have the capability to run as much as 100psi base fuel pressure. All Injector Dynamics injector sets are saturated, high impedence in design so there is no need for injector drivers or injector resistor packs. These injectors have superior atomization and a very narrow spray pattern which results in more power, better idle and better fuel efficiency. Unlike many injectors in the market today, these injectors have excellent low pulsewidth response with linearity within 2 percent. This has been proven and documented with pulsewidth of 2 milliseconds and injector response is predictable even at 1.5 milliseconds. The excellent response time of these injectors allow for extremely high injector duty cycle (IDC). No longer are your recommended IDC's capped at 85 percent. Injector Dynamics fuel injectors allow you to run 92.5 percent duty cycle at 9,000 rpm and up to 95 percent IDC at 6,000 rpm while maintaining linearity within 1 percent. These injectors come in many common sizes and can be adapted to almost any custom application.