Back to Agency Power Main Page

One of the most popular power upgrades for the Porsche 996 Turbo, X50, GT2 has been our high flow 3 inch Y-Pipe kit.  Now this same kit that has been available for years is now available in full carbon fiber!  The new Y-Pipe replaces the factory unit and 70% of the silicone boost hoses.  Designed to work with the stock style intercoolers, we include new silicone adapters and cnc machined fittings. The new Y-Pipe reduces any possibility of pressure drop or blowing off a boost hose.  As well, the Y-Pipe reduces the bend by about 45 degrees compared to stock for a straight shot to the intercooler.  Because of the shape and design, airflow is improved which equals the improvement in power.  Our end goal was simple, build a product that would retain the stock airbox, flow better, use OEM parts, and look the part!  

Using our Mustang all wheel drive dyno, we tested the original part on a car with 91 octane and low boost set at 1.2bar.  With fans moving fresh air to the intercoolers, we did a baseline on the car and achieved a starting point of 493whp and 477ft/lbs of torque.  Leaving the car strapped to the dyno, we removed the stock Y-Pipe and bolted on the Agency Power upgraded carbon y-pipe.  With everything secured in place, we fired up the car to give it a run with the new Y-Pipe.  With absolutely NO changes to the cars configuration, the Y-Pipe added 21whp and 24ft/lbs of torque to the car.  This was quite an impressive bolt on gain that also added style and potential scalable performance to the car.

This part fits all 2001-2005 Porsche 996 Turbo, X50, and GT2.  All Agency Power products come with a LIMITED LIFETIME warranty when you fill out this form HERE.

All Agency Power products come with a LIMITED LIFETIME warranty when you fill out this form HERE.